Master-Bilt DS-12D Conventional Ice Cream Storage / Dipping Cabinet

Description

Master-Bilt DS-12D Conventional Ice Cream Storage / Dipping Cabinet
CONDITION:  This cabinet was used in a gelato shop then placed in storage when the compressor failed.  The cabinet needs a new compressor (approximately ,600) and is being sold as is.
New DC-12D cabinets range anywhere from ,600 to ,600.
The exterior of this cabinet has been modified on two sides (front and facing left) with wood paneling - some of which will either need to be glued back on or removed entirely (Please review the pictures).  There are some dents, scuffs, and scratches from having been used in a commercial shop.
Construction:
·
Seamless stainless-steel top
·
24 gauge painted,textured, galvanized steel cabinet
·
Galvanized steel interior
·
Equipped with leveling legs to correct for uneven flooring
·
Floor drain with garden hose fitting
·
Galvanized steel inner liner with cold wall evaporator
·
Anti-condensate heaters under stainless top cap
·
2 1/4" foamed-in-place "zero ODP" urethane insulation
Lids:
·
Stainless steel
·
Hinged withhandles
·
Gasket
Refrigeration:
·
Refrigerant - R-404A
·
Self-contained,factory tested refrigeration system
·
Semi-hermetic condensing unit with wire & tube condenser for low maintenance
·
Minimum 4"clearance is required between the cabinet back and wall
·
Temperature range:  10°F to -10°F
·
R-factor (insulation efficiency rating): 19.40
Hookup via plug in, 9 foot long, flexible 3 wire 14/3 cord with molded plug.  10amp 115V service is recommended.
NOTE:  The cabinet is designed for optimum performance in an air-conditioned area of 75°F ambient temperature and 55% relative humidity.
Dimensions : 84 5/8"L x 30 1/8" D x 34 1/8" H
Additional details:
·
115V
·
7.5 Amps
·
1/3 HP Semi-hermetic compressor
·
29.1 Cap. Cu. Ft.
·
NSF & UL Listed
Printed and / or pdf versions of the Specification Sheet and "Installation & Operations Manual" included.
***IMPORTANT SHIPPING INFORMATION – PLEASE READ ***
Buyer is responsible for contacting a company and arranging for the crating and shipping of the item.
The Buyer is also responsible for paying the crating / shipping company directly.
Seller will meet with the Buyer’s crating / shipping company to provide access to the item.
Seller will not crate, ship, or provide payment to Buyer’s crating / shipping company.