-40%
Standard Horizon CMB 16 VHF Radio Mount Bracket Flush Mount Kit,
Standard Horizon CMB 16 VHF Radio Mount Bracket Flush Mount Kit,
Standard Horizon CMB 16 VHF Radio Mount Bracket Flush Mount Kit,
Standard Horizon CMB 16 VHF Radio Mount Bracket Flush Mount Kit,

Standard Horizon CMB 16 VHF Radio Mount Bracket Flush Mount Kit,

$ 6.85

Availability: 45 in stock
  • Manufacturer Part Number: CMB 16
  • Condition: New
  • Brand: Standard Horizon
  • Returns Accepted: ReturnsNotAccepted

    Description

    Flush Mount Kit for Most Standard Fixed Mount VHF Radios Condition is New.
    CMB16 FLUSH MOUNT INSTALLATION
    1. Make a rectangular template for the flush mount measuring 2” H x 5-5/16” W.
    2. Use the template to mark the location where the rectangular hole is to be cut. Confirm the space behind the dash or panel is deep enough to accommodate the transceiver (at least 6 inches deep). There should be at least 1/2 inch between the transceiver’s heatsink and any wiring, cables or structures.
    3. Cut out the rectangular hole and insert the transceiver.
    4. Fasten the brackets to the sides of the transceiver with the lock washer nut combination (NOT INCLUDED) , so that the mounting screw base faces the mounting surface
    5. Turn the adjusting screw to adjust the tension so that the transceiver is tight against the mounting surface.